Home | Contact Us | Sponsor/Advertise
Air Conditioning Contractors of America
Not logged in.
Please login for full access to our site. Or join today for instant access!

 
Ask the Experts:
Residential HVACR

You're viewing our online Q&As related to Residential HVACR. Other technical categories include Commercial HVACR and General HVACR. You can also browse our complete list of technical Q&As, and ask a question of your own.

Q&As Related to Residential HVACR

Federal Regs on Upgrading Older HVAC Systems
Mismatched heat pumps and upgrading older model HVAC systems. Read it. Members Only

J8 Fireplace
The fireplace calculation in Manual J 8th edition explained. Read it. Members Only

# on my J Speedsheet
Common user problems with the J speedsheet Read it. Members Only

Thermal Mass
Calculating thermal mass in a Manual J procedure. Read it. Members Only

Sensible Heat Ratio (SHR)
The default sensible heat ratio is not always the right one. Read it. Members Only

What load calculation software should I purchase?
Find the tool you need to use all of the Manual J8 applications. Read it. Members Only

Manual J for Replacements
Q&A for Consumers: explains the importance of Manual J heating and cooling load calculations. Read it. Members Only

Bypass Duct Design
It's time to update your bypass duct designs. Here's guidance on variable air volume (VAV) duct designs. Read it. Members Only

Flex Duct Friction Loss Calculations
How to calculate friction loss on already installed flex systems. Read it. Members Only

High Duct Static Pressure Found
What to check and do when the duct static pressure is running higher than the design value. Read it. Members Only

A1/A2, and Slope in Manual D Group 12 Transitions
An explanation of terms used in Manual D fittings Read it. Members Only

Just Say No to Pan Joists
Use of pan joists for return ducts is not recommended. Read it. Members Only

Temperature Difference Between Rooms
Temperature differences between rooms in a dwelling. Read it. Members Only

Commercial Kitchen Hoods in a Home
Design considerations for the level of exhaust ventilation must be addressed. Read it. Members Only

Shutting Off Unsafe Equipment
Shutting off unsafe equipment and the legal issues that arise. Read it. Members Only

Matching SEER Requirements
Matching SEER requirements when replacing indoor/outdoor equipment. Read it. Members Only

One System, Multiple Zone Levels
Requirements when two zone levels are being supplied by one system. Read it. Members Only

Kitchen Hood Considerations
Design considerations to be taken to overcome different levels of ventilation. Read it. Members Only

Fireplaces and Manual J
Fireplaces have considerable impact on heating, but not mch on cooling. Read it. Members Only

True Duct Design
Even with a true duct design, technicians must concern themselves with the return side of the system. Read it. Members Only

Troubleshooting Mold
A member asks for help diagnosing a mold issue on three registers of a 16-register system. Read it. Members Only

You're viewing our online Q&As related to Residential HVACR. Other technical categories include Commercial HVACR and General HVACR. You can also browse our complete list of technical Q&As, and ask a question of your own.